Batt Insulation

The process of installing batt insulation is relatively straightforward and can be done in a few simple steps. 

1. Measure the space to be insulated: Before buying batts, measure the area that needs to be insulated and use this information to buy enough materials for the job. 
2. Install vapor barriers: Make sure vapor barriers are installed on both sides of the wall or ceiling before insulation is placed into place. This will help prevent moisture from accumulating and creating mold growth. 
3. Cut batts to size: Use a utility knife with a sharp blade to cut batts to fit snugly into spaces between framing members in walls or ceilings. Take care not to puncture them with nails or screws during installation. 
4. Place batts in spaces: Make sure to place the batts with the facing side out so that it can reflect radiated heat and keep spaces warm. Secure them into place using staples or adhesive tabs as necessary. 
5. Fill all cavities and cracks: Be sure to fill all gaps and voids, such as around window frames, door frames, electrical boxes, pipes, and ducts with insulation for a better seal against airflow. 
6. Seal seams: Once all the batts are installed, use caulk or spray foam insulation to seal any remaining gaps or cracks to help prevent air infiltration. This will also help improve the energy efficiency of the home. 
7. Check work: After installation is complete, inspect the space to ensure all insulation is in place as expected and that it’s correctly spaced. Make sure there are no gaps or cracks that haven’t been sealed. 
8. Enjoy improved comfort: Once you have completed your insulation installation, enjoy the benefits of better temperature control and energy efficiency in your home! You should feel an immediate improvement in comfort levels, soundproofing, and energy savings.